358 mesh fence has a anti-cutting advantage.
Dimensions
- 358 mesh panels specifications
- Mesh aperture: 3" × 0.5" (76.2 mm × 12.7 mm).
- Wire diameter: 6 gauge (4.88 mm), 8 gauge (4.0 mm), and 10 gauge (3.25 mm)
- Weld strength: 540–690 N/m2.
- Surface treatment: powder coating or hot dipped galvanized.
- Colors: Green RAL 6005, Black RAL 9005 or all RAL colors.
- 358 fence posts specifications
- Material: high grade steel for maximum strength and rigidity.
- Post section
- Square post (SHS)
- Size: 60 × 60 mm, 80 × 80 mm;
- Thickness: 2.0/2.5/3.0 mm;
- Height: 2.5/2.8/3.0/3.7 m.
- Rectangle post (RHS)
- Size: 60 × 80 mm;
- Thickness: 2.0/2.5/3.0 mm;
- Height: 2.5/2.8/3.0/3.7 m.
- C post (CHS)
- Size: 60 × 80 mm;
- Thickness: 2.0/2.5/3.0 mm;
- Height: 2.5/2.8/3.0/3.7 m.
- Square post (SHS)
- Accessories
- Post cap: metal caps or plastic caps.
- Metal clips and clamps: hot dip galvanized and then powder coating
Item | Fence Height (m) | Panel Size (Height × Width) (mm) | Fence Post (Height × Size × Thick) (mm) | Clamp Bar (Height × Width × Thick) (mm) | Interior or Corner Clamps Quantity |
---|---|---|---|---|---|
EZ358-01 | 2.0 | 2007 × 2515 | 2700 × 60 × 60 × 2.5 | 2007 × 60 × 5.0 | 7 or 14 |
EZ358-02 | 2.4 | 2400 × 2515 | 3100 × 60 × 60 × 2.5 | 2400 × 60 × 5.0 | 9 or 18 |
EZ358-03 | 3.0 | 2997 × 2515 | 3800 × 80 × 80 × 2.5 | 2997 × 80 × 6.0 | 11 or 22 |
EZ358-04 | 3.3 | 3302 × 2515 | 4200 × 80 × 80 × 2.5 | 3302 × 80 × 6.0 | 12 or 24 |
EZ358-05 | 3.6 | 3607 × 2515 | 4500 × 100 × 60 × 3.0 | 3607 × 100 × 7.0 | 13 or 26 |
EZ358-06 | 3.6 | 3607 × 2515 | 4500 × 100 × 100 × 3.0 | 3607 × 100 × 7.0 | 13 or 26 |
EZ358-07 | 4.2 | 4204 × 2515 | 5200 × 100 × 100 × 4.0 | 4204 × 100 × 8.0 | 15 or 30 |
EZ358-08 | 4.5 | 4496 × 2515 | 5500 × 100 × 100 × 5.0 | 4496 × 100 × 8.0 | 16 or 32 |
EZ358-09 | 5.2 | 5207 × 2515 | 6200 × 120 × 120 × 5.0 | 5207 × 100 × 8.0 | 18 or 36 |
NOTES:
- Height: the height of the 358 mesh fence panel.
- Width: the distance between two 358 mesh fence posts, they are measured from center to center.
- Hot dipped galvanized: dip the fence into a container that is full of liquid zinc, and this way will prevent the 358 mesh fence from getting rusty.
- Electric galvanized + polyester powder coated: electric galvanized (zinc coating 8–12 g) as a pre-surface treatment inside, polyester powder layer outside, and this way will prevent the 358 mesh fence from getting rusty, too.
Advantages
- Anti-climbing. Smaller openings. Therefore, human's fingers and toes can't go through.
- Anti-cutting. Robust wires and welded joints make it difficult for wire cutters and bolt cutters to cut.
- Versatility. Many different applications, such as schools, parks, leisure and recreational areas.
- Durability. 358 mesh fence, made from high quality steel wire and then galvanized or polymer powder coating, ensures a long service life.
- High strength welded at each intersection.
- Mesh fence is configured to provide maximum visibility, especially emergency and electronic detection systems need to use it.
- Can be stepped to accommodate sloping ground.
- Clamp bar fixings.
- Custom designs available.
Production Process & Package
- 358 mesh fences are firstly welded by machine in the factory.
- Secondly, they will be galvanized or polymer powder coating for their high security and durability.
- Thirdly, all the products should be test strictly.
- Finally, they are packaged in plastic films and then stored and transported on wooden pallets. Each package is firmly attached to the pallets by a special tape.
Installation
Determine how tall your fence is. If the fence is 4 feet, the steel posts will need to be 6 feet. The posts will need to be at least 2 feet taller than your fence. When you install your fence, using the metal tails to pin up the wire to the post at the top, the middle and the bottom. Once the mesh panel is pinned up, pin up the next mesh panel. You should splice two mesh panels together.And then cover a plastic caps for posts to improve their anti-corrosion property. Especially, you should notice that when installing the 358 mesh fence, you should overlap 75 mm of two panels or overlap one opening distance to maintain integrity of protection.
Applications
As an anti-climbing and anti-cutting barrier, 358 mesh fence is designed with good welded character. Therefore, it has the characteristics of security and durability.
The main market of 358 mesh fence is in South Africa, United States and Nigeria. Most of the clients prefer hot dipped galvanized surface treatment.
It is ideally suitable for electronic alarm and detection systems, fencing in prisons, military sites, and airports, industrial and commercial properties, warehouses, power plants, offshore petrochemical facilities, seaport perimeter, laboratories, secure hospitals, schools, parks, leisure and recreational areas.
358 mesh fence will give them a long lasting and secure perimeter protection with attractive appearance.
Generally, 3.60 m height fence is used in schools, parks, leisure and recreational areas.
5.20 m height fence is widely used in prison and military establishments.
In addition, if 358 mesh fence were added to razor wires, barbed wires and rota spikes, it would have higher security character.